UP56
Category: Level Sensor
Specifications
Bluetooth
No
Certificate
China-RoHS, EU declaration of conformity, IO-Link, cULus certificate, UK declaration of conformity, ACMA declaration of conformity
Communication interface
IO-Link
Connection type
Connecting cable, flying leads, 5-wire, shielded, PVC, round connector M12 x 1, 5-pin
Detection principle
non contact
Display
Yes, No
Enclosure rating
IP67
Housing material
PVDF, PTFE, PP, FKM, PBT, Stainless steel 1.4571, TPU
Measurement principle
Ultrasonic sensor
Measurement
Continuous, switch
Medium
Fluids, bulk solids
Output signal
4 mA ... 20 mA, 1 x PNP + 4 mA ... 20 mA / 0 V ... 10 V, 2 x PNP, 2 x NPN, 1 x push-pull: IO-Link 1.1 (process data, diagnostics, parameterization, data repository)
Probe length/sensing range
1001 mm ... 1500 mm, ≥ 500 mm, 3001 mm ... 3500 mm
Process connection
2'' NPT, G 1 A, G 2 A PN 6, GF connection D40, 1" NPT
Process pressure
0 bar ... 2 bar, gauge pressure for UP56 Pure mini, 0 bar ... 6 bar, gauge pressure
Process temperature
-25 °C ... 85 °C, -25 °C ... 70 °C
Product segment
Level sensors
Product name
UP56
Response time
≤ 68 ms, ≤ 240 ms, ≤ 180 ms, ≤ 84 ms
Task
Monitoring and controlling - Processes, Monitoring and controlling - Plants and machines, Measuring - Level
Measuring range in tank
350 mm ... 3400 mm, 30 mm ... 250 mm, 200 mm ... 1300 mm, 85 mm ... 350 mm, 65 mm ... 700 mm
Details
Non-contact, precise ultrasonic level sensor – even for demanding media.
The UP56 ultrasonic level sensor is the ideal solution for demanding applications. The PTFE-protected transducer is pressure resistant up to 6 bar and also very resistant to difficult media. Stainless steel, PVDF and PFTE are also available as housing materials. This means the UP56 is suitable for non-contact measurement of aggressive, viscose, inhomogeneous or abrasive liquids and bulk materials. Thanks to the combination of two switching signals in one device, idling and overfill can be monitored at the same time. With an analog output and switching signal, continuous measurement with a separate overfill signal is also possible. The sensor is easy to parameterize using the integrated display, IO-Link or a Connect+ adapter.
UP56 AT A GLANCE
Benefits:
- Non-contact and therefore wear-free measurement even in pressurized containers
- Universal application – even in difficult media such as acids or bases
- Quick and easy parameterization
- Switching output and analog output in a single device
- Adjustable ultrasonic cone for stable measurements even in tight installation spaces
- Reliable blanking of stirrers possible
- Measures accurately and reliably even in mediums with density fluctuations
Features:
- Operating range: up to 3.4 m, limiting range: up to 8.0 m
- Pressure resistant up to 6 bar, temperature resistant up to 85°C
- PTFE-coated membrane and GF D40 process connection made of PTFE
- Analog output can be switched between 4 mA ... 20 mA and 0 V ... 10 V
- Different sizes available
- Simple operation, also via Connect+
- IO-Link 1.1
View more about UP56 on main site