DBS60
Category: Incremental encoders
Specifications
0-set function via hardware pin
No
Angular acceleration
≤ 500000 rad/s, ≤ 200000 rad/s
Certificate
EU declaration of conformity, UK declaration of conformity, ACMA declaration of conformity, cULus certificate, cRUus certificate, China-RoHS
Communication Interface detail
TTL, HTL
Communication interface
Incremental
Connection
cable with male connector, cable, male connector, Special version
Construction size (flange)
60 mm
Direction of connection
universal, radial
Enclosure rating
IP66, IP67, IP69K, IP50, IP65
Flange type / stator coupling
without stator coupling, flange with 3 x M3, 3 x M4, axial register pin mounting, for 4 mm register pin, 1-sided stator coupling, slots, screw hole circle radius 32.25142.75 mm, 1-sided stator coupling, slot, screw hole circle radius 31.548.5 mm, stator coupling, 2-sided, screw hole circle 63 mm, without stator coupling, flange with 4 x M2,5, 2-sided stator coupling, slot, screw hole circle 6383 mm, axial and radial register pin mounting, for 4 mm register pin, Special version, One-sided stator coupling, slots, slot radius 32.25142.55 mm, slot width 4.5 mm, flange with 4 x hole 5.5 mm, flange with 3 x M3 and 3 x M4, 1-sided stator coupling, slot, screw hole circle radius 32.1 mm37.6 mm
Housing material
stainless steel V4A (316L), Aluminum die cast, Aluminum, Stainless steel V2A
Length of cable
3 m, 5 m, 1.5 m, 0.5 m, 10 m
Mechanical design
Solid shaft, face mount flange, Special version, through hollow shaft, blind hollow shaft, Solid shaft, Servo flange, Solid shaft, Square flange, through hollow shaft, rear clamping
Number of cores
8-wire
Number of pins
12-pin, 8-pin
Number of signal channels
6-channel, 3 channel
Operating temperature range
-35 °C ... 85 °C, -25 °C ... 80 °C, -30 °C ... 80 °C, -20 °C ... 80 °C, -30 °C ... 100 °C, -20 °C ... 85 °C, -30 °C ... 85 °C
Output frequency
+ 300 kHz, ≤ 300 kHz
Product segment
Incremental encoders
Programmable/configurable
No
Pulses per revolution
256, 2048, 10000, 1500, 1024, 600, 1000, 128, 2385, 2500, 720, 6000, 20, 900, 8192, 5, 50, 1200, 2400, 2, 400, 2000, 3600, 360, 5000, 10, 640, 440, 25, 100, 512, 2024, 4445, 125, 3000, 250, 300, 500, 7200, 8, 4096, 48, 4098, 60, 200, 889, 180, 4
Reference signal, position
180° electric, logically gated with A and B, 90° electric, logically gated with A and B
Safety system
No
Shaft diameter
8 mm, 12 mm, 10 mm, 5/8″, 14 mm, 3/8″, 1/2″, 15 mm, 6 mm
Shaft length
25.4 mm, 19 mm, 18 mm, 10 mm
Shaft material
stainless steel, stainless steel with plastic shaft, Stainless steel V2A, stainless steel with plastic collet, stainless steel V4A (316L), Stainless steel with metal collet
Shock resistance
200 g, 100 g, 250 g
Special feature
No, Yes
Specialty
Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651827, Customer-specific encoder label with Getriebebau NORD part number: 19651914, 8-wire PUR cable, universal, 1.5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651801, cable, with male connector, M23, 12-pin, 0.5 m, Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651808, Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651833, Cable 8-core, universal, 0.7 m with male connector M12 with panel mounting, 5-wire PUR cable, universal, 1.5 m, M12, 5-pin, customer-specific pin assignment, enclosure rating IP66, start up torque: 2.6 Ncm, operating torque: 2.5 Ncm, customer-specific encoder label with Getriebebau NORD part number: 19651916, second and identical encoder label fastened to packaging, customer-specific packaging label, no operating instructions (can be accessed digitally), device is exclusive, cable, 5-wire, with male connector, SUB-D, 5.2 m (-0/+80 mm), cable shielding connected to the SUB-D connector, Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651826, cable, 8-wire, universal, 6 m with USB connector, A-code, customized pin allocation, 4 pulses per revolution, hole circle diameter 1.75”, PUR cable for flexible use, male connector M23, 12-pin, customized stator coupling, Shaft fixation by compression of collet from the back side of encoder, Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651829, Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number:19651830, 8-wire PUR cable, universal, 15 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651822, number of lines: 4445, Connection cable 1.5 m, 8-wire PUR cable, universal, 10 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651813, ATM60 housing (Part.no. 4096182) with DBS60 core electronics, M12 4-pin male connector with customized pin assignment, radial with customer specific PIN-allocation, SICK will inform customer Mita if any technical data need to be changed or if any hardware or software is changed, Cable, 8-wire, universal, 0,25 m with male connector M12, 8-pin, A-coded, with cap, 512 pulses per revolution, Encoder label with Getriebebau NORD part number: 19651911, customer specific Encoder flange: face mount flange with servo slot, cable, 8-wire, universal, 0.5 m (with aluminium sqaure block fixing) with military connector, male, 10-pin at the cable end, customized encoder flange, 440 pulses per revolution, shaft 25.4 mm, customized type label with Bluhm-partnumber 40097299, cable, with male connector, M23, 12-pin, universal, 0.5 m, 8-wire PUR cable, universal, 5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651806, special ball bearing for start up torque of 0.2 Ncm, reduction of IP enclosure rating to IP50, Ceramic ball bearing, Connection cable 2 m, Bus adapter with D-Sub connector, resolution: 600 ppr, Start up torque 0.3 Ncm, operating torque 0.2 Ncm, Temperature range: Operation: -20…+80°C, Storage: -30…+85°CVoltage range: 10 … 27 VDC (Tmax. +80°C)Extended voltage range: > 27 … 30 VDC (Tmax. +60°C)Cable, PUR, 5.5 mm, with male connector, M12, 4-pin, A-coded, shielded, 1.6 mPulses per revolution: 1024Package: single encoder in a plastic bag, the encoders with plastic bags are put into a bulk packaging, 8-wire PUR cable, universal, 1.5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651800, cable, 8-wire, with male connector, M23, 12-pin, universal, 0.7 m, Cable, 8-wire, universal, 1 m, flying leads, Connection cable 20 m, cable, 8-wire, universal, 2 m, Neutral packaging with customized packaging label, 2 pulses per revolution, 8-wire PUR cable, universal, 1.5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651918, Customer-specific pin assignment, Connector M16, 8-pin, customized pcb with 16 zero pulse positions, 1-sided stator coupling, 3 slots, screw hole circle radius 35 mm - 45 mm (M4), 44 mm - 54 mm (M4), 54.5 mm - 57.5 mm (M6), Cable, 8-wire, universal, 0.5 m with Lumberg SV70 7-pin plug at end of cable, 2500 pulses per revolution, customized mounting brackets, connector M12, 5-pin radial with customized pin allocation, cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651814, 8-wire PUR cable, universal, 5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651804, Customer-specific encoder label with Getriebebau NORD part number: 19651919, Customer-specific encoder label with Getriebebau NORD part number: 19651910, Through hollow shaft 7 H7, cable, 8-wire, universal, 1.0 m with male connector tie, start up torque 0.3 Ncm, operating torque 0.2 Ncm, customer-specific assembly accessories (elastomer buffer + M4 screw), customer-specific hollow shaft with 7 H7 and 2 mounting setscrews - without collet, Cable, with plug, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific 1-sided stator coupling, S-curvature, screw hole circle radius 32.1 mm 37.6 mm, customer-specific encoder label with Getriebebau NORD part number: 19651835, customized orientation of the stator coupling, alignment tolerance between the connector and flange hole pattern: +/- 1.5°, 256 pulses per revolution, Shaft diameter 12 mm, resolution: 900 ppr, Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651828, PUR cable, 8-wire, universal, 9 cm, M12, 8-pin with rear wall assembly, A-coding, customer spec. Pin assignment, enclosure rating IP66, start up torque: 2.6 Ncm, operating torque: 2.5 Ncm, military connector, female, 10-pin included in delivery, One-sided stator coupling, elongated hole, radius of bolt hole circle 32.137.6 mm, hole width 4.5 mm, 1024 pulses per revolution, Cable, 5-wire, with plug, M12, 5-pin, universal, 5 m, 8-wire PUR cable, universal, 1.5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651802, Plug, M12, 4-pin radial with customer-specific pin assignment, 8 pulses per revolution, Customer-specific hollow shaft with 7 H7 (without collet), Cable, 8-wire, with plug, M23, 12-pin, universal, 1.5 m, Cable 150 mm, with male connector, M12, 8-pin on cable end, Cable, 8-wire, radial, 15 m, shaft 10 x 19 mm round, face mount flange with M3 & M4, Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number:19651831, 18 pieces package, male Connector, Lumberg M16, 5-pin., radial, Customized label, Cable 8-core, universal 1.0 m with male connector M12 with panel mounting, cable 8-wire 1.0 m, universal with male connector M12 (finecable male connector MB12MWSAF08ST-A), item DBS60E-T5ECB0S117 is based on two encoders of type DBS60E-T5ECB05000 with customized pin allocation, which are mechanically connected via an adapter, cable, 8-wire, universal, 0.37 m, FCI header, second label included in packaging, PUR cable, 8-wire, universal, 1.5 m, flying leads with ESD bag at the end, customer-specific wire color, enclosure rating IP66, start up torque: 2.6 Ncm, operating torque: 2.5 Ncm, customer-specific encoder label with GBN part number: 19651912, second and identical encoder label affixed to packaging, customer-specific packaging label, no operating instructions (can be accessed digitally), orderable batch size of 162 pcs, shipped in 9 bulk packs of 18 pieces each, device is exclusively for Getriebebau NORD, Mating connector delivered with in the box, the following technical data apply to the set of 2 encoders: Weight: 0.55 kg, start up torque: 1.0 Ncm (+20°C), operating torque: 0.8 Ncm (+20°C), moment of inertia of the rotor: 100 gcm, Communication interface HTL/Push pull, 3-channels, cable, 5-wire, universal, 0,5 m with military connector MS3102E-16S-1P male, Customized pin configuration in M23 male connector in encoder side, Second and identical encoder label fastened to packaging, customer-specific packaging label, no operating instructions (can be accessed digitally), device is exclusively for Getriebebau NORD, Cable, 6-wire, universal, 10 m with customer-specific pin assignment, Through hollow shaft, 7 mm, Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651820, customized type label with Bluhm-partnumber 40034820, cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19550669, PUR cable, 8-wire, universal, 9 cm, M12, 8-pin with rear wall assembly, A-coding, customer-specific pin assignment, enclosure rating IP66, start up torque: 2.6 Ncm, operating torque: 2.5 Ncm, 8-wire PUR cable, universal, 10 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651807, PUR cable, with male connector tie (99-5629-15-12), 1 m, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651816, 8-wire PUR cable, universal, 1.5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651917, Cable, universal, 250 mm, with male connector M12, 8-pin, with central fixing and customized pin allocation, integrated stator coupling, number of lines: 889, optional accessory: customer specific adapter flange (2088849), PUR cable, 5-wire, universal, 9 cm, M12, 5-pin with rear wall assembly, A-coding, customer-specific pin assignment, enclosure rating IP66, start up torque: 2.6 Ncm, operating torque: 2.5 Ncm, Customized shaft 10 x 170 mm (mounted on hollow through shaft), customized solid shaft with adapter, second and identical encoder label fastened to packaging, customer-specific packaging label, no operating instructions (can be accessed digitally), device is exclusively for GBN, Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651832, Cable, 8-wire, universal, 1.0 m with M12 plug, 8-pin, customer specific adapter flange premounted, M12 male connector, 4-pin, radial, face mount flange, solid shaft 6 mm, length 18 mm, 8-wire PUR cable, universal, 2 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651803, item DBS60E-T8ECB0S127 is based on two encoders of type DBS60E-T8ECB05000 with customized pin allocation, which are mechanically connected via an adapter, 8-wire PUR cable, universal, 5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651812, 1-armed flat stator coupling, slot width 6 mm, Shaft diameter 10 mm, Stator coupling (2076215) premounted, no SICK logo on packaging and operating instruction, customized lable with Mita logo instead of SICK, no operating instruction in the packaging, Customized stator coupling compained with anti-rotation pin, Male connector, SUB-D, 15-pin, solid shaft, 10 mm x 25 mm, customized wire color, tapered shaft, cable, 8-wire, 1.5 m, 8-wire PUR cable, universal, 1.5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651810, Measuring wheels pre-mounted, 200 mm (BEF-MR010020R/2055224), Customer-specific encoder label with Getriebebau NORD part number: 19651913, Start up torque max. 0.3 Ncm, 8-wire PUR cable, universal, 10 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651818, female connector M23 included in delivery, customized pcb with 10 zero pulse positions, customized packaging (no print), customized type label with Kardex-partnumber 2000107729, Cable, 8-wire, universal, 0,5 m with male connector M12, 8-pin, A-coded, with cap, Customer-specific mounting accessories (elastomer buffer + M4 screw), Operating temperature range 35 °C ... +85 °C(UL approved until +75°C), Plug, M23, 12-pin, radial, customer-specific pin assignment, military connector MS3106A-16S-1S female in delivery scope, test data protocol is transmitted electronically, Cable, 8-wire, with socket, Lumberg KV80 at end of cable, universal, 1.5 m, Cable, 8-wire, universal, 1.0 m with male connector tie, cable, with male connector, M23, 0.5 m, 8-wire PUR cable, universal, 1.5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651915, customized type label with Kardex-partnumber 7792880, HTL preprogrammed, 8-wire PUR cable, universal, 1.5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651809, PUR cable, with male connector tie (99-5629-15-12), 1 m, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651817, 8-wire PUR cable, universal, 1.5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651811, Through hollow shaft clamping at the back 12 mm, customized type label with Bluhm-partnumber 40034989, cable, 5-wire, universal, 5 m, with M12 5-pin male connector and customized pin assignment, Cable, 8-wire, universal 1.5 m with customized wire color, cable, with male connector, M23, 12-pin, universal, 0.35 m, Cable, 5-wire, universal, 5 m with SUB-D plug, 9-pin at end of cable, Customer-specific encoder label with Getriebebau NORD part number: 19651900, 2385 pulses per revolution, Premounted ABP FSKK 3022 10/10 spring disk, length of cable 6.5 m, number of lines: 256, Cable, with male connector, M12, 8-pin, radial, 0.3 m, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651823, Cable, with male connector, M12, 8-pin, 0.3 m, radial, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651815, 8-wire PUR cable, universal, 5 m, open cable end with ESD bag at the cable end, customer-specific wire colors, enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651805, shaft isolated, 5 mm spacer enclosed to fix the encoder in the application, 8-wire PUR cable, universal, 5 m, open cable end with ESD bag at the cable end, customer-specific wire colors enclosure rating IP66, customer-specific encoder label with Getriebebau NORD part number: 19651825, Customer-specific servo flange
Supply voltage
4.5 V ... 5.5 V, 10 V ... 27 V, 4.5 V ... 30 V, 7 V ... 30 V, 10 V ... 30 V
Task
Measuring - Speed and acceleration, Measuring - Angle, inclination and rotational movement, Determining position - 1D position determination
Type of connector
M12, M23
Details
Rugged, universal use incremental encoder
The DBS60 is a rugged incremental encoder with a 60 mm diameter and small installation depth. The device comes in an aluminum or stainless-steel housing and offers lots of mechanical interfaces. The DBS60 Inox variants can even withstand harsh ambient conditions due their fully stainless steel design and rugged shaft seal. The IP69K DBS60I-W variant with its patented deflector screen is the ideal solution for applications in washdown environments. In addition to the interfaces for TTL and HTL, the DBS60 also offers two universal interfaces with a wide voltage range. Due to the high enclosure rating, rugged design, and a resolution of up to 10,000 pulses per resolution, the DBS60 is suitable for applications in many different industries.
DBS60 AT A GLANCE
Benefits
-Various installation options and connection types allow flexible cabling
-Compact housing dimensions save valuable space
-With its insulated hollow shafts, the encoder is protected against damage from any eddy currents or higher temperatures transmitted by the shaft
-Stainless steel housing provides corrosion protection against environmental influences
-Protection against water ingress with IP enclosure rating up to IP69K
-Reliable operation in harsh washdown environments with hot water and high pressure in the food and beverages industry
Features
-Pulses per revolution: Up to 10,000
-Housing diameter: 60 mm
-Solid shaft, blind hollow shaft, and through hollow shaft
-Enclosure rating: IP67, IP69K
-Communication interfaces: TTL/RS-422, HTL/Push Pull, universal interface (TTL, HTL)
-Connection type: M12 or M23 male connector, cable, cable with M12 or M23 male connector
-Stainless steel or aluminum housing
View more about DBS60 on main site