DBS36/50
Category: Incremental encoders
Specifications
0-set function via hardware pin
No
Angular acceleration
≤ 500000 rad/s
Certificate
ACMA declaration of conformity, EU declaration of conformity, UK declaration of conformity, cRUus certificate, cULus certificate, China-RoHS
Communication Interface detail
TTL, HTL, Open Collector
Communication interface
Incremental
Connection
cable, cable with male connector, Special design
Construction size (flange)
36 mm, 50 mm
Direction of connection
universal
Enclosure rating
IP65
Error limits G
± 54°
Housing material
Aluminum
Length of cable
1.5 m, 0.5 m, 5 m, 10 m, 3 m
Mechanical design
Solid shaft, face mount flange, Solid shaft, face mount flange 3xM4, Special design, blind hollow shaft, Solid shaft, Servo flange, through hollow shaft
Number of cores
8-wire, 5-wire
Number of pins
8-pin, 12-pin
Number of signal channels
6-channel, 3 channel
Operating temperature range
-20 °C ... 85 °C, -20 °C ... 70 °C, -10 °C ... 70 °C, -30 °C ... 85 °C, -40 °C ... 85 °C, -30 °C ... 90 °C, -35 °C ... 85 °C, -30 °C ... 70 °C, -28 °C ... 85 °C, -30 °C ... 95 °C, -10 °C ... 60 °C
Output frequency
≤ 200 kHz, ≤ 300 kHz
Product segment
Incremental encoders
Programmable/configurable
No
Pulses per revolution
300, 1200, 20, 1, 125, 60, 32, 400, 50, 5, 200, 800, 2048, 360, 10, 2000, 256, 1024, 100, 600, 512, 250, 720, 1500, 1000, 120, 500, 2500
Reference signal, position
90° electric, logically gated with A and B
Safety system
No
Shaft diameter
1/4″, 6 mm, 15 mm, 8 mm
Shaft length
13 mm, 12 mm, 15.5 mm
Shaft material
stainless steel
Shock resistance
100 g
Special feature
No, Yes
Specialty
cable, 8-wire, universal, 2 m, 800 pulses per revolution, Customer-specific pin assignment, specified operating conditions: one cycle of 1 min. every 30 min., only seldom (not every day) the motor makes a cycle of 20 min., for adaption on 1.25 m wire draw, cable, 8-wire with male connector M12, universal, 3 m, Short-circuit protection, Operating temperature range 28 °C ... +85 °C, Cable, 8-wire, universal, 1.5 m with customer-specific cable material, solid shaft, customized face mount flange, Cable, 8-wire, universal, 6 m, material: PUR, customized flange adapter, 19 mm length with flat form on the full length, number of lines 1000, 5 pulses per revolution, Cable, 8-wire, universal, 1.5 m, customized cable connection (10 cm braided shield), Blind hollow shaft 8 mm, customized Resolution: 1ppr, Customer part number: 60.015.033, Order lot size: 36 pieces, customized PIN allocation HTL/Push pull 7 V ... 27 V A, B channels, face mount flange, Extended temperature range: -30 °C ... 95 °C, extended temperature range: -30 °C … 85 °C, IPEK part no.: 375-0221-00, customized encoder flange, additional customer-specific packaging label (with bar code for project BAA633A1 (format 128)), cable, 5-wire, with M12 5-pin male connector, universal, 0.5 m, Cable, 5-wire with plug, M12, 5-pin, A-coded, permanently injection-molded with two plastic markings, universal, 2.5 m, cable, 8-wire, 5 m with male connector Lumberg M16, Operating temperature: -30 °C to +90 °C, cable, with male connector, M12, 0.75 m, angled, number of lines 100, number of lines: 1,024, customized stator coupling, IPEK part no.: 375-0220-00, Cable, 8-wire, universal, 0.15 m with M12 male connector at the cable end, cable, 8-wire, universal 0.5 m, with male connector M12, 4-pin with customized PIN allocation (see attached table), additional O-Ring for connection between shaft and meauring wheel (4084743), extended temperature range: -40 °C … 85 °C, Customized label, Customized face mount flange (clamp collar diameter 16 mm, 3*M3 on hole circle diameter 20 mm), Customer part number: 60.015.036, AMP-connector, resolution: 400 ppr, cable, 8-wire, universal 68.8 cm, customer-specific shaft, cable, 8-wire, with male connector, M12, 8-pin, universal, 0.2 m, flange adapter 2033631, BEF-FA-025-063 premounted, 60 pulses per revolution, bending radius: static 44.0 mm, dynamic 66.0 mm, 1 = +US; 2 = n.c.; 3= Channel A; 5 = n.c., Type code, 5-pin, Additional cable 5-wire, 3 m length with female connector M16-5p Lumberg KV50 included, temperature range down to -30 °C, customized type code, 1 = +US; 2 = Channel B; 3 = GND; 4 = Channel A; 5 = n.c., Cable, 8-wire with plug, M12, 8-pin, universal, 0.1 m with customer-specific pinouts, face mount flange, solid shaft 8 mm, length 15.5 mm, premounted sleeves in black and violet, 1pulse/turn (A/B) Z is not required, wireend sleeves at the end of the cable, cable, 8-wire universal, 1,0 m, with male connector M12, 8-pin, customized solid shaft, Diameter 5 mm, length 12.5 mm, cable, with male connector, M12, 0.3 m, angled, customized shaft, customized connector and customized stator coupling premounted, customized encoder flange (replace LD20), solder the wire A-, B- and Z- to PCBA slot, cable, 8-wire, universal, 10 m with customer-specific cable end (the wires for Z and Z- are cut and the A- and B- wires are merged into heat-shrink tubing), customized type label (details --> screenshot below dimensional drawing), customized operating instruction, centering: 17.45 mm, 2 x M3 threads, 5 mm depth, cable, 8-wire, universal, 3 m with customer-specific cable end, Operating temperature: -30 °C to +85 °C, blind hollow shaft 6 mm, Customer part number: 60.015.032, solid shaft, 10 mm x 19 mm, Operating temperature range 35 °C ... +85 °C, solid shaft 5/16'', customized shaft: Solid shaft, diameter 8 mm, length 15.5 mm with longer flat area for improved installation of measuring wheel system, Ambient data - Operating temperature range possible from -35°, Cable, 5-wire, with male connector, M16 (DIN 41524), 5-pin, universal, 5 m, IPEK part no.: 375-0222-00, Shaft length 15 mm, cable, 8-wire, universal, 2 m with customized wire colour, delivery in bulk packaging (36 pcs. / packaging), neutral packaging, 3-channel: A, B, Z with short-circuit protection 5-wire cable, cable, with male connector, M12, universal, 1.1 m, Cable length 3 m, Cable, 8-wire, with male connector, SUB-D (without screws), 9-pin, universal, 0.25 m, cable, 8-wire, 5 m
Supply voltage
7 V ... 27 V, 4.5 V ... 5.5 V, 4.5 V ... 30 V, 7 V ... 30 V
Task
Measuring - Angle, inclination and rotational movement, Determining position - 1D position determination, Measuring - Speed and acceleration
Type of connector
M12, M23
Details
Compact standard incremental encoder for industrial applications
The DBS36/50 incremental encoder is characterized by its high mechanical flexibility, excellent technical properties, and many variants. The encoders are available with housing diameters of 36 mm and 50 mm as well as various blind hollow shafts and solid shafts. Thanks to the various mounting hole patterns, servo clamps and servo grooves, and universal stator couplings, the DBS36/50 devices offer comprehensive mounting options. All models have compact dimensions and a universal cable connection. This allows both axial and radial cable routing.
DBS36/50 AT A GLANCE
Benefits
-The flexible cable connection makes installation flexible and easy especially when space is limited
-Tailorable to the application: Many mounting options due to various flanges and universal stator couplings
-Can be used internationally thanks to shafts in both metric and inch sizes
-The high mechanical flexibility and the large selection of supported accessories ensure the variants can be used in many applications
-The compact housing diameter saves valuable space
-The encoder has a longer service life and is more reliable in operation due to the high enclosure rating, temperature range, and storage life
Features
-Pulses per revolution: Up to 2,500
-Housing diameter: 36 mm or 50 mm
-Solid shaft and blind hollow shaft
-Enclosure rating: IP65
-Communication interfaces: TTL/RS-422, HTL/Push Pull, Open Collector
-Connection type: Cable, cable with M12 or M23 male connector
View more about DBS36/50 on main site