Specifications
Certificate
EU declaration of conformity, ACMA declaration of conformity, China-RoHS, cULus certificate, MAR declaration of conformity, UK declaration of conformity
Code type
Gray
Communication Interface detail
SSI + Sin/Cos, SSI + incremental, HTL, TTL
Communication interface
SSI
Connection
male connector, cable, cable with male connector
Construction size (flange)
60 mm
Direction of connection
radial, universal
Enclosure rating
IP65, IP67
Error limits G
0.2°, 0.03°, 0.05°
Housing material
Stainless steel V2A, Aluminum die cast
Length of cable
2 m, 0.65 m, 3 m, 5 m, 1.5 m, 1 m, 10 m, 0.45 m, 0.15 m, 8 m, 0.2 m, 0.85 m, 0.5 m, 0.35 m
Mechanical design
Solid shaft, face mount flange, Solid shaft, Square flange, Solid shaft, Servo flange, blind hollow shaft, through hollow shaft
Number of cores
8-wire, 12-wire
Number of pins
8-pin, 17-pin, 12-pin
Number of revolutions
4096 (12 bit)
Number of steps per revolution
512 (9 bit), 262144 (18 bit), 36000, 600, 65536 (16 bit), 720, 256 (8 bit), 2048 (11 bit), 32768 (15 bit), 7200, 31680, 18000, 28800, 16384 (14 bit), 4096 (12 bit), 1024 (10 bit), 8192 (13 bit), 131072 (17 bit), 1080, 3600, 360
Operating temperature range
0 °C ... 85 °C, -40 °C ... 100 °C, -30 °C ... 100 °C
Product segment
Absolute encoders
Programmable/configurable
No, Yes
Programming interface
over handheld programming tool, over SOPAS
Safety system
No
Shaft diameter
6 mm, 12 mm, 14 mm, 10 mm, 1/2″, 3/8″, 15 mm, 5/8″, 8 mm
Shaft length
19 mm, 25 mm, 10 mm
Singleturn or multiturn version
Multiturn, Singleturn
Special feature
No, Yes
Specialty
face mount flange, solid shaft 12 mm x 25 mm, customized type label on the cable (position see dimensional drawing // content see screenshot of the label underneath the dimensional drawing), customer specific Encoder flange: face mount flange with servo slot, preprogrammed number of SSI steps: 8,192, Pre-mounted PEEK sleeve (2064573), cable, 8-wire, with male connector, Molex, universal, 0.45 m, Cable, 12-wire, radial 0.857 m with M23 male connector on cable end, cable, 8-wire, with male connector, M23, 12-pin, universal, 0.2 m, Positioning 70,000, customer specific adapter flange premounted, rear clamping, customized blind hollow shaft, Connector M23, preprogramming of electrical interface with HTL setting and preprogramming of SSI with 08192 increments, Preprogramming of electrical interface with HTL setting and preprogramming of SSI 4,096 steps, ATM60-A1A0-K25 successor:, Label protection 4102060 mounted, shaft diameter 6 mm, Encoder label glued on the cable, Customized label, Enclosed female connector DOS-2312-G (6027538), Preprogramming of electrical interface with HTL setting, 2,048 pulses per revolution and preprogramming of SSI 8,192 pulses per revolution, radial with customer specific PIN-allocation, Stator Coupling 2057423, LENZE material number (13655259) on the label, cable, 12-wire, radial, 0.857 m, with M23 12-pin male connector, with Firmware V11, male connector M23, 12-pin, customized packaging (5328005), face mount flange with M3 thread (6 depth) 3* 120° (4077751), Customized Encoder is exclusive for customer SHANGHAI LIYA ELECTRONICS CO., customized stator coupling 2047430, customized cable (2061853/DOL-0J08G1MAA3S02) 1.0 m with, wire-end sleeve (length of the metal part 8 mm) and a tube, at the end of the shielding wire, female connector M23 included in delivery (part no.: 6041733), cable, 12-wire, 500 mm with male connector M23 and plastic protection cap, HTL preprogrammed, 12-wire cable connection, 800 mm with M23 male connector and protective plastic cap, Customized mounting instructions (EN/ES), Max. resolution: 12 bit x 12 bit (4,096 x 4,096), male connector, M23, 12-pin, radial, customized PIN assignment, Operating temperature 40 °C to +100 °C, premounted conductor insulation 12 x 14 PEEK (4071053), Cable connection 1.00 m with M23 male connector STE-2312-GX (6028548), CW 17-pin, shaft sealing: IP67 on the shaft, starting torque < 1 Ncm, pigtail 200 mm with male connector M23, 12-pin, Customized housing (see drawing), no premounted cable connection, customized encoder cable (included loose), optional accessory: customer specific half-shell servo clamps (please order separately: 2088848 BEF-WG-SF050S1), Connector M23, 12-pin, radial with customer specific pin allocation (cw numbering at M23 connector), Cable, 0.15 m, 8-wire, universal with assembled M23, 12-pin male connector with customized pin assignment (pin numbering male connector CW), preprogrammed preset position: 16,777,215, LENZE material number (13647182) on the label, Special stator coupling Part no. 4071692, Counting direction CW falling, Cable, 0.65 m, stator coupling BEF-DS03DFS/VFS (2047431) premounted, customized stator coupling (4062426) preinstalled, Cable tail, 35 cm, with male connector, M23 (2061621) at the end, 12-wire cable connection, 500 mm with M23 male connector and protective plastic cap
Switching input/Switching output
No
Task
Measuring - Angle, inclination and rotational movement, Determining position - 1D position determination, Measuring - Length and distance, Measuring - Speed and acceleration
Type of connector
M23, Molex, M12
