Details

---

Product Description
The Dimension CD-Series offer DIN rail DC/DC converters in the 92-120W output power range in a very compact housing. These DC/DC converters are allowed to run with a battery or similar sources or can also be used to refresh and stabilize the 24Vdc on the end of long cable runs. The basic units include all the essential basic functions while the -S1 version is equipped with quickconnect spring clamp terminals, a DC-OK contact which monitors the output and an input-low-relay-contact. The –L1 version additionally fulfills the NEC Class 2 requirements. All devices except the CD5.241-L1 have a PowerBoost of 20% incorporated. This extra power can even be used continuously up to +45°C.


DC/DC Converters

• 24V DC Input
• Quick-connect Spring-clamp Connection Terminals
• Isolated 24Vdc Output
• Efficiency up to 90.2%
• Width only 32mm
• 20% Output Power Reserves
• Full Power Between -25°C and +60°C
• Soft-start Function Included
• Minimal Inrush Current Surge
• Reverse Input Polarity Protection
• DC-OK and Input-low Relay Contact
• 3 Year Warranty

Order Number
DC/DC Converter CD5.241-S1 Standard unit

Accessory
ZM1.WALL Wall mount bracket
ZM10.WALL Wall mount bracket
ZM11.SIDE Side mount bracket
YR2.DIODE Redundancy module